Pressure Pot 2.25 Gallon with Air Agitator
SKU:
$620.99
This heavy duty commercial paint pressure pot is inexpensive and easy to use and provides a steady material flow for air guns. It resists tipping and is easy to clean with an inner stainless steel liner. For use with all standard coatings such as: lacquer, enamel, stain, latex, epoxy, glue, etc.
A one gallon paint can will fit inside. The air motor is heavy duty, powerful and speed controlled by an air flow valve.
A one gallon paint can will fit inside. The air motor is heavy duty, powerful and speed controlled by an air flow valve.
Description
It comes with 2 regulators: one for setting fluid pressure to a maximum of 50 psi, and the other for setting the air to the gun to a maximum of 100 psi. For use with all standard coatings such as: lacquer, enamel, stain, latex, epoxy, glue, etc. A one gallon paint can will fit inside the pot. The suction tube is in Stainless Steel and have a suction screen
2.25 Pressure Pot Specifications
Air requirement: 1/10 to 8 cfm (depending on the air adjustment of the agitator)
Maximum pressure: 50 psi
Air inlet: 1/4″ NPS-M
Air outlet: 1/4″NPS-M
Fluid outlet: 3/8″ NPS-M
Air regulator: Dual w/Gauges
Gallon can fits inside: Yes
Air requirement: 1/10 to 8 cfm (depending on the air adjustment of the agitator)
Maximum pressure: 50 psi
Air inlet: 1/4″ NPS-M
Air outlet: 1/4″NPS-M
Fluid outlet: 3/8″ NPS-M
Air regulator: Dual w/Gauges
Gallon can fits inside: Yes
Additional information
| Weight | 43 lbs |
|---|---|
| Dimensions | 14 × 13 × 21 in |